反射型云纹法在岩石爆破机理研究中的应用

利用反射型动态云纹实验方法，对爆炸载荷作用下岩石平板试件中应力波传播及裂纹动态扩展进行研究，给出了高速转镜相机记录到的岩石平板爆炸加载实验时的动态云纹图。根据动态云纹图分析了炸药爆炸产生的应变场，并对裂纹的形成及其扩展速度的变化趋势进行了讨论。     

一种表面裂纹高温断裂韧性测试方法

提出了一种表面裂纹高温断裂韧性测试方法，包括试样加热、温控和裂纹嘴张开位移测试方法．该方法适合于在相对简单的条件下测试表面裂纹高温断裂韧性．最后给出了铝合金焊缝表面裂纹高温断裂韧性的测试结果．     

前体非对称涡高风速烟雾显示技术

通过在细长旋成体模型机身的不同位置设置出烟孔，使用新型发烟装置对模型注入雾化油 滴，采用激光片光法在常规风洞中高风速(60m/s)条件下得到清晰、完整而稳定的截面涡 结构图像. 并通过同状态标定法和等比例网格法发展了简易涡位定量测量技术，为前体非对 称涡Re数效应的研究提供了重要的技术平台.     

含膦酸酯官能团离子液体对钢/铝摩擦副的润滑作用研究

合成了3种新型1-(O,O-二乙基膦酰丙基)-3-烷基咪唑六氟磷酸盐离子液体,采用SRV型摩擦磨损试验机评价了所制备的离子液体作为润滑剂对钢／铝摩擦副摩擦学性能的影响,并探讨了其润滑机理．结果表明,所合成的离子液体作为润滑剂对钢／铝摩擦副具有优良的润滑作用,摩擦系数低,抗磨性能优良．表面分析结果表明含膦酸酯官能团的离子液体在摩擦副接触表面形成化学吸附边界润滑膜,从而有效地起到抗磨和提高承载能力的作用．     

Heat and Mass Transfer in MHD Micropolar Flow Over a Vertical Moving Porous Plate in a Porous Medium

An analysis is presented for the problem of free convection with mass transfer flow for a micropolar fluid via a porous medium bounded by a semi-infinite vertical porous plate in the presence of a transverse magnetic field. The plate moves with constant velocity in the longitudinal direction, and the free stream velocity follows an exponentially small perturbation law. A uniform magnetic field acts perpendicularly to the porous surface in which absorbs the micropolar fluid with a suction velocity varying with time. Numerical results of velocity distribution of micropolar fluids are compared with the corresponding flow problems for a Newtonian fluid. Also, the results of the skin-friction coefficient, the couple stress coefficient, the rate of the heat and mass transfers at the wall are prepared with various values of fluid properties and flow conditions.     

轴对称高速碰撞问题的拉格朗日无结构网格有限体积法的并行计算

给出计算轴对称高速碰撞问题的拉格朗日无结构三角形网格有限体积法的并行格式，并给出以小巨型机ＡｌｉａｎｔＦＸ／４０为目标计算机的算例数值模拟结果和效率分析     

汽车碰撞砼护拦过程的数值模拟

将汽车与砼护拦简化为刚体，给出了描述碰撞过程中车辆三维空间运动的Ｅｕｌｅｒ－Ｌａｇｒａｎｇｅ方程－微分代数方程组，采用半显式外插方法求解上述方程组。数值计算得出的车辆各方向上的最大平均加速度、最大侧倾角、最大俯仰角、车轮沿护拦面的最大爬升值及车辆脱离护拦时的弹出角等结果是从乘员风险和车辆轨迹等多角全面评估砼护拦的安全性能的重要依据。针对美国ＮｅｗＪｅｒｃｙ型砼护拦的实际算例与文献结果吻合较好。     

双柱单锥型液-液旋流管内流场的激光诊断

应用激光测速仪，对一种双柱单锥型液 液旋流管内的流动结构，进行了全场范围内的多工况流动诊断研究．揭示出其切向速度由内旋流区和外旋流区构成，其中内旋流区中的速度分布符合准强制涡关系，外旋流区中的速度分布符合准自由涡关系；轴向速度由上行流动区和下行流动区构成，两者之间在直管段以零速点作分界，在锥体段则以零速区作过渡并伴随有一定的回流出现，且该过渡区或回流区的大小随锥体截面的收缩而减小，直到进入直管段后消失；各湍流量的分布以管芯处最大向外逐渐减小，沿轴向是直管段中的湍流度大于锥体段中的湍流度，而且湍流度在旋流管内具有各向异性的特性．     

Transient rheological behaviour of poly-para-henylenetherephthalamide (PpPTA) in sulphuric acid

Nearly all the available information on the transient flow behaviour of liquid crystalline polymers has been obtained on model systems, especially on solutions of polybenzylglutamate (PBG) and hydroxypropylcellulose (HPC). The assessment of rheological models has been based almost entirely on these model systems. It is not clear how much of the available theoretical and experimental knowledge can be applied to systems of industrial relevance, which have quite different molecular structures. Here, an industrial lyotropic system, poly(p-phenylenetherephthalamide) (PpPTA) in sulphuric acid (TWARON from AKZO), is investigated. Various techniques to study transient behaviour are used, these include measurements of transient shear and normal stresses after sudden changes in shear rate, dynamic moduli and stress relaxation after cessation of flow and elastic recoil. At all shear rates studied the PpPTA solution is shear thinning, and the first normal stress difference remains positive. For the stress transients a strain scaling applies reasonably well as it did in model systems. The moduli increase with time upon cessation of flow, indicating that the molecules become less oriented in the previous flow direction. This particular behaviour is similar to that of HPC. Transients also resemble more closely those of HPC rather than those of PBG. This latter difference might be attributed to the higher flexibility of HPC and PpPTA chains as compared with PBG molecules.     

RESEARCH ON METHOD TO CALCULATE VELOCITIES OF SOLID PHASE AND LIQUID PHASE IN DEBRIS FLOW

Velocities of solid phase and liquid phase in debris flow are one key problem to research on impact and abrasion mechanism of banks and control structures under action of debris flow. Debris flow was simplified as two-phase liquid composed of solid phase with the same diameter particles and liquid phase with the same mechanical features. Assume debris flow was one-dimension two-phase liquid moving to one direction, then general equations of velocities of solid phase and liquid phase were founded in two-phase theory. Methods to calculate average pressures, volume forces and surface forces of debris flow control volume were established. Specially, surface forces were ascertained using Bingham's rheology equation of liquid phase and Bagnold's testing results about interaction between particles of solid phase. Proportional coefficient of velocities between liquid phase and solid phase was put forward, meanwhile, divergent coefficient between theoretical velocity and real velocity of solid phase was provided too. To state succinctly before, method to calculate velocities of solid phase and liquid phase was obtained through solution to general equations. The method is suitable for both viscous debris flow and thin debris flow. Additionally, velocities every phase can be identified through analyzing deposits in-situ after occurring of debris flow. It is obvious from engineering case the result in the method is consistent to that in real-time field observation.